Bhavna Enterprises

Our entity is engaged in offering an elevated quality Danfoss KP 15 Dual Pressure Switch. In tune with the latest industry standards, our presented product is designed at our vendor's end using latest technology and sophisticated tools & equipment. In order to cater to all needs of our clients, our offered product is presented in different custom-made specifications. Moreover, we offer this product within a fixed time frame.

Features:

• Customization
• Superior finish
• Easy to install
• Light weight

MP 55 Danfoss Pressure Switch are used as safety switches to protect refrigeration compressors against low lubricating oil pressure. If the oil pressure fails, the oil differential pressure switch stops the compressor after a certain time period. MP 54 and MP 55 are used in refrigerating systems using HCFC and non-flammable HFC refrigerants. MP 55A is used in refrigerating systems with R717. MP 55A can also be used in systems with HCFC and non-flammable HFC refrigerants. MP 54 has a fixed differential pressure setting. It also incorporates a thermal time relay with a fixed release time setting. MP 55 and MP 55A have adjustable differential pressure and are available both with and without thermal time relay.

Features:

• Wide regulating range
• Can be used for deep freeze, refrigeration and air conditioning plant
• Can be used for HCFC and non-flammable HFC refrigerants
• Electrical connection at the front of the unit
• Suitable for both alternating and direct
• current (AC and DC)
• Screwed cable entry for cables from 6 –14 mm
• diameter
• Small contact differentia

Approvals:

• CE mark according to LVD 2006/95/EC
• EN 60947-1, EN 60947-4-1, EN 60947-5-1
• China Compulsory Certificate, CCC
• Versions having UL and CSA approvals can be
• supplied to special order

Ship approvals:

• Germanischer Lloyd, GL Registro Italiano Navale, RINA (MP55)

Specifications:

• Amb. Temperature: 80 Degree C, 176 Degree F for max 120 min
• Ambient Temperature: -40 to 65 Degree C
• Ambient Temperature: -40 to 149 Degree C
• Approval: cUL us UL353, CS C22.2, C UL us UL873, CS C22.2, CCC, CE, EAC, LVD, PZH, Rina, RMRS, RoHS China
• Contact Function: SPDT
• Contact Rating: AC1=16A, 400V/ AC15=10A, 400V/ AC3=16A, 400V/ DC13=12W, 220V/ LR=112A, 400A
• Diff.: 0.70 to 4 Bar, 10 to 58 PSI
• Ean No. 5702423146642
• Electr. Conn.: Rubber Cable Gland
• Electr. Conn. Size: 4-14 mm
• EN 60947 Electrical Properties: Insulation 400V, Pollution Degree 3, Rated Impulse Voltage: 4 kV, Short Circuit Prot, Fuse: 16A, Flex Ferrules: 0.5-1.5 mm2, Flex No Ferrules: 0.7-2.5 mm2, Solid Standard: 0.75-2.5 mm
• Nema Rating (-): 1
• Max. Test Pressure: 22 Bar/319 Psig
• Max. Working Pressure: 17 Bar/245 Psig
• Pack Format: Multi Pack
• Pressure Conn. STD. ISO228-1
• Pressure Conn. Type: G-1/4 Male
• Pressure Sensing Elem.: Bellows
• Product Accessories: Switches Accessories
• Prod. Description: Pressure Switch
• Prod. Group: Switches and Thermostats
• Regul. Range: 6inHg-108 psig, -0.20 to 7.50 Bar
• Reset: Auto
• Serviceable: No
• UL Approval File Name: E31024
• UL Approval File Name: MH27572

KP36 Danfoss Pressure Switch are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly.

Features:

• High contact load - Ultra short bounce-time
• Also available with gold plated contact systems
• Media: Gaseous media and air
• Enclosure IP44 when mounted with top cover and back plate
• Also available with enclosure IP55 for OEM customers
• Small dimensions - space saving - easy to install
• Shock and impact resistant

KP pressure switchs are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure.

KP pressure switches are also used for starting and stopping refrigeration compressors and fans on air-cooled condensers

A KP pressure switch can be connected directly to a single-phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors.

KP pressure switches are fitted with a single-pole double-throw (SPDT) switch. The position of the switch is determined by the pressure switch setting and the pressure at the connector. KP pressure switches are available in IP30, IP44 and IP55 enclosures.

Features:

• Ultra-short bounce time thanks to snap-action function (reduces wear to a minimum and increases reliability)
• Manual trip function (electrical contact function can be tested without the use of tools)
• Types KP 6, KP 7 and KP 17 with fail-safe double bellows element
• Vibration and shock resistant
• Compact design
• Fully welded bellows element
• High reliability both electrically and mechanically

Approvals:

• CE-marked in accordance with: – LVD 2006/95/EC (EN 60947-1, EN 60947-4-1, EN 60947-5-1)
• PED 97/23/EC, category IV (EN 12263): KP 1, KP 2, KP 6, KP 7 and KP 17
• Underwriters Laboratories Inc., UL listed China Compulsory Certificate, CCC 

Ship Approvals:

• Germanischer Lloyd, GL Det Norske Veritas, Norway, DNV Registro Italiano Navale, RINA
• Bureau Veritas, BV Lloyd’s Register, LR Russian Maritime Register of Shipping, RMRS

Specifications:

• Ambient temperature: 40 – 65 °C (80 °C for max. 2 hours).
• Ambient temperature (PED approved units): -25 – 65 °C (80 °C for max. 2 hours).
• Max. working pressure: LP: PS / MWP = 17 bar, HP: PS / MWP = 35 bar, KP 6: PS / MWP = 46.5 bar
• Max. test pressure: LP: Pe = 20 bar, HP: Pe = 35 bar, KP 6: Pe = 46.5 bar
• Contact load: Alternating current: AC1 =16 A, 400 V, AC3 = 16 A, 400 V, AC15 = 10 A, 400 V, Direct current DC13 = 12 W, 220 V control current
• Wire dimensions: Solid / stranded 0.75 – 2.5 mm2, Flexible, without ferrules 0.7 – 2.5 mm2, Flexible, With ferrules 0.5 – 1.5 mm2
• Enclosure: IP44 / IP55

Emerson Make High pressure switch EK  series etc.We have all type of pressure switches. All makes are available

Adjustable Single and Dual Pressure Controls for high and low pressure applications.

Features:

• Adjustable pressure range 
• Narrow adjustable differential depending on model 
• Range and differential pointer in units bar and psig 
• Range and differential individually lockable by wire seal 
• High rated SPDT contacts for all versions 
• Shatter resistant contacts 
• Heavy duty, finger-proof terminal blocks 
• Captive terminal and cover screws 
• Dual pressostats with two independent SPDT switches 
• Manual toggle for system checkout and override 
• Standard pressure connection 7/16”-20 UNF for 1/4” SAE male flare connection 
• Low pressure and high pressure versions available with TÜV approval according to EN 12263 to meet requirements of DIN 8901 and EN 378 
• Automatic and manual reset versions 
• Some versions with convertible auto/manual reset 
• Locking plate and mounting screws included

Options (minimum lot size 100 pieces):

• Alternative pressure connectors including 6 mm ODF solder connection 
• Factory set to customer specification